ecoSHIELD™ Eco Nitrile PF 250 Glove...

ecoSHIELD™ Eco Nitrile PF 250 Gloves with twinSHIELD™ Technology, Medium, 1,500 Gloves

Labscoop, LLC

Product Information

Product Overview:

Powder Free Extra Length Ambidextrous Non-Sterile 25 cm Nitrile Gloves with Textured Fingertips. Registered as PPE Category III (Complex Design) according to Council Directive 89/686/EEC. Fully compliant to the latest PPE norms – EN 374:2003 “Protective gloves against chemicals and micro-organisms”. Synthetic soft nitrile polymer (Acrylonitrile Butadiene), based on twinSHIELD™ technology. Contains no natural rubber latex. Double barrier protection afforded by green outer layer, combined with white inner lining. Ambidextrous, beaded cuff and with textured fingertips.

Catalog#: SS-9260M-CS
LID#: 4821993L
Quantity :
ESTIMATED SHIP DATE: 08/28/2019
Order by Phone or Fax: 1.800.316.3081

Specifications

Ecological50% more products in the same volume to limit CO2 emissions and save space storage. Ink on the packaging reduced by 60%. Packaging made from recycled cardboard. Supply Chain optimized to reduce CO2 emissions by more than 15% to deliver our products.
Freedom from Holes<0.65 AQL (EN 374:2003, AQL as defined per ISO 2859 for sampling by attributes)
Tensile StrengthBefore Aging: 6.0N, min., Typical: 7.0N, Ultimate Elongation: 500%, min. (Test Method: EN 455-2:2015, ASTM D573-04(2015) and ASTM D412-15a)
After Accelerated Aging: 6.0N, min., Typical: 8.0N, Ultimate Elongation: 400%, min. (Test Method: EN 455-2:2015, ASTM D573-04(2015) and ASTM D412-15a)
Dimensional Nominal ThicknessMiddle Finger: 0.14 mm, 5.5 mil
Palm: 0.10 mm, 3.9 mil
Cuff: 0.08 mm, 3.0 mil
(Test Method: ASTM D3767-03(2014))
Dimensional LengthXS/6-L/9: 250mm, min. / 255mm, typical (Test Method: EN 420:2003 + A1:2009)
XL/10: 260mm, min. / 265mm, typical (Test Method: EN 420:2003 + A1:2009)
Nominal Palm WidthXS/6/=80 mm, S/7/85 mm, M/8/95 mm, L/9/105 mm, XL/10/=110 (Test Method: EN 455-2:2015)
Nominal Hand CircumferenceXS/6/152 mm, S/7/178 mm, M/8/203 mm, L/9/229 mm, XL/10/254 (Test Method: EN 420:2003 + A1:2009)
BiocompatibilityDemonstrated by Buehler and Primary Skin Irritation Tests.
Chemical AllergensNon-detectable levels of chemical allergens using aqueous solution extraction (Phosphate buffered solution) and High Performance Liquid Chromatography (HPLC) assay method for quantitative analysis.
Powder FreePowder free to minimize the potential consequences of powder-borne dermatitis. Residual powder content is 1.0 mg/glove (typical) with a limit of 2.0 mg/glove (ISO 21171:2006 “Medical gloves – Determination of removable surface powder”).
Micro-Organism & Virus ResistantMicro-organism and virus resistant – passes highest level of micro-organism resistance per EN 374-2:2014 (Performance level 3, AQL <0.65 and inspection level G1 according to 1000ml water test) and passes viral penetration test using Phi-X174 bacteriophage (ISO 16604:2004 Procedure B & ASTM F1671-97b).
Chemical PermeationExtensively tested for chemical permeation according to EN 16523-1:2015.
Manufacturing ComplianceManufactured in accordance with ISO 9001:2015 and ISO 13485 2016.
Thiazoles & ThiuramsThese chemical accelerators are excluded from the manufacturing process.
Unit Size1,500 Gloves / Case
Safety StatementsFor Research & Development Use Only
Sample AvailabilityNo

Shipping & Handling

Estimated Ship Time: 2 Business Days

Shipped In: Ambient

Packaging: Hundred & fifty (150) gloves per natural carton dispenser. Gloves are flat-packed. Ten (10) dispensers per case. Recycle carton only.

Hazardous Material: No

Storage

Shelf Life: 2 Years

Storage Temperature: RT

Customer Reviews

Average Customer Rating
(0)
Review & Rating Distribution